Radius Fabrications

PDI Landcruiser HDJ100 / 100 / 105 Series Front Mount Intercooler Mk2 1HD series core

$1,900.00 inc. GST
Select Setup
Order now to boost your chances of delivery before Christmas! While we strive for timely shipping, please note there's no guarantee of delivery before the holiday.
Please be aware that Radius Fabrications operates with a made-to-order policy, resulting in wait times for all products. If you require information on current wait times, please contact us. Additionally, we kindly request that you make your selections carefully, as Radius Fabrications does not offer refunds for changes of mind. We prioritize delivering top-notch, custom-made products to our customers and have therefore instituted a strict "No Change of Mind" refund policy in line with the nature of our business.
International orders may incur additional shipping charges at time of dispatch.
Description

We have the largest and most efficient intercooler for the Landcruiser 100 / 105 Series. 5.7 x bigger than factory.

The PDI Landcruiser 100 / 105 Series Front Mount Mk2 intercooler significantly raises the bar for what can be achieved. Now these engines are pumping out +300rwkw, we have the intercooler that is the clear choice for such a setup.

Core size: 675x300x76. Thats over 5.8 x greater surface area than the HDJ100 factory core, is thicker and better placed for increased cooling.

Fits with all bull-bar and winch designs as the core sits back close to the condenser.

Will fit a 100 series HDj100 with no modifications to the air conditioning system. If you have a 105 and would like to fit the large core, then the hose and piping from the condenser to the compressor needs to be replaced with the recessed HDJ100 pipe, or purchase a one piece replacement from us.

Intercooler pipes: 2.5” stainless steel with heavy duty silicon joiners. Silicon selection now simplified with no silicon in front of the front panel.

High torque stainless steel clamps.

The moulded end tanks with rear facing outlets have enabled a bigger core, then we pushed it back as far as possible to increase the draw through from the engine cooling fan. With the outlets being rear facing, the stainless steel pipes are connected to the intercooler with straight silicon.

During testing we have seen this maintain intake temps to 4-7degC above ambient temperature for normal around town driving.

When under load (on the highway towing a heavy trailer) running a steady 15-18psi with 150degC the intake temps sat 15deg above ambient. On a 20degC the intake temps got up to 35deg - you’ll have to trust us, but that’s really impressive.

For HZJ105 running the 1HZ engine we suggest our smaller core (645x240x65) to reduce the heat loading on the radiator. While it is not as effective as our larger core, most 1HZ aren’t pushed too hard and this core will easily cater for almost all turbo 1HZ builds. This core is designed to fit around the condenser pipe.

Air can be felt strongly pulling through the intercooler 50-80mm in front of the core, while idling on startup. To continue to have the air being pulled through while engine temps are low (and the fan hub normally free wheels) some extra fluid can be added to the viscous coupling.

The early 100 series didn’t have any power steering cooler pipes out front and most owners leave it like that. If you have or want to maintain the power steering pipe cooler this need to be routed through the opening for the passenger side headlight.

A crossover delete option is available (extra $150) for the 1HD-FTE.

All 1HZ / 1HD-T / 1HD-FT are crossover delete design as standard and has no extra fee.